How do you adjust Hunter sprinkler heads? - sprinkler key
Underground sprinkler can for spraying the crowd and / or flow characteristics (current or a fine spray thick adjustable). I have a plastic key, but do not know how to use it.
Wednesday, January 13, 2010
Sprinkler Key How Do You Adjust Hunter Sprinkler Heads?
Subscribe to:
Post Comments (Atom)
4 comments:
convert the area to be defined. Look at the head, a small triangle at the top, where the water comes. You can use the Allen key tool. Put the wrench and turn it clockwise to make the jet more or less to extend more. Be careful when turning the project is no longer no further. The nozzle if you can do. The adjustment made by turning a key to the whole head done, there is a hole that a circle with an arrow and a plus sign, this adaptation of the leftists. You can use the other end. Put it in the toolbox, and turn until you fall into the slot. Rotate the tool on the arrow to open the radius of the head or in the opposite direction to close it. The best way to comfortably fit to be with a lot of irrigation is, if a head that rotates a full circle have. No matter how much you miss, you simply open the Save the circle when you're done.
convert the area to be defined. Look at the head, a small triangle at the top, where the water comes. You can use the Allen key tool. Put the wrench and turn it clockwise to make the jet more or less to extend more. Be careful when turning the project is no longer no further. The nozzle if you can do. The adjustment made by turning a key to the whole head done, there is a hole that a circle with an arrow and a plus sign, this adaptation of the leftists. You can use the other end. Put it in the toolbox, and turn until you fall into the slot. Rotate the tool on the arrow to open the radius of the head or in the opposite direction to close it. The best way to comfortably fit to be with a lot of irrigation is, if a head that rotates a full circle have. No matter how much you miss, you simply open the Save the circle when you're done.
convert the area to be defined. Look at the head, a small triangle at the top, where the water comes. You can use the Allen key tool. Put the wrench and turn it clockwise to make the jet more or less to extend more. Be careful when turning the project is no longer no further. The nozzle if you can do. The adjustment made by turning a key to the whole head done, there is a hole that a circle with an arrow and a plus sign, this adaptation of the leftists. You can use the other end. Put it in the toolbox, and turn until you fall into the slot. Rotate the tool on the arrow to open the radius of the head or in the opposite direction to close it. The best way to comfortably fit to be with a lot of irrigation is, if a head that rotates a full circle have. No matter how much you miss, you simply open the Save the circle when you're done.
In the real beginning of the pump heads are holes that crises keys. A hole is clear, and it is with an X cut in the plastic-marked, but not obvious to the eye. To take care of a game to find you. Use both ends of the key, with which I've used. All the settings you can change back, so it's just trial and error, if you are not familiar with them. Turn the key and go slowly do not need much work key to big changes. If your view is not yet lost your local irrigation or whether Hunter has a website.
Post a Comment